Cisco Room Kit EQX User Manual

44 Copyright © 2024 Cisco Systems, Inc. All rights reserved.D15519.02 | 2024 JANUARY | Cisco Room Kit EQX Installation Guide
15. Connect power and network cables
Connect amplifier to codec:
• Connect the cable between the amplifier and the codec
(D1). Route it as shown in the illustration.
Main network cable:
• Connect the network cable to the codec (E1). Use the
regular cable routes when leading the cable toward the
network wall socket.
Don’t connect it to the wall socket yet.
Main power cable:
• Connect the cable to the power strip (E3). Use the regular
cable routes when leading the cable toward the network
wall socket.
Don’t connect it to the wall socket yet.
D1
D1
E1
E1
E3
Codec
C
E1
Amplifier
D1
D1

Cisco Room Kit EQX Specifications

General

Brand	Cisco
Model	Room Kit EQX
Category	TV
Language	English