CHAPTER 2
System Configuration
This chapter describes how to configure global system settings and perform diagnostics. It contains the
following topics:
•
LAN, page 9
•
Time, page 15
•
Notification, page 17
•
User Accounts, page 21
•
Management, page 23
•
Security, page 30
LAN
This section describes how to configure the port, VLAN, LLDP, IPv4, and IPv6 settings on the WAP device.
IPv4 Configuration
Use the IPv4 Setting page to configure the IPv4 address.
Step 1
Select LAN > IPv4 Configuration.
Step 2
Configure the following IPv4 settings:
• Connection Type — By default, the DHCP client on the WAP device automatically broadcasts the requests for
network information. If you want to use a static IP address, you must disable the DHCP client and manually
configure the IP address and other network information.
Choose one of the following options:
◦ DHCP — The WAP device acquires its IP address from a DHCP server on the LAN.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
9
To Next Page
Loading...
