Cisco WAP125 Administrator's Guide

Guest User Account
To configure a guest user account:
Step 1
Select Guest Access >Guest Group Table .
Step 2
Click the number link on the Total Guest Users field to display the Guest User Account Table in the Guest User
Account page.
Step 3
Click ✚ to add a user.
Step 4
Guest User Name — Enter the name for the new guest user. The name can contain up to 32 alphanumeric characters.
Step 5
Guest User Password — Enter the password. The password can contain 8 to 64 alphanumeric and special characters.
Step 6
Click Save.
You can click Back button link to view the Guest Access page.
To delete or modify a guest user, you need to select it and then click Delete or
Edit.
Note
Web Portal Customization
After the CP instance is associated with a VAP, create a locale and map it to the CP instance. When the user
accesses a VAP that is associated with a CP instance, the authentication page will appear.
Use the Web Portal Customization page to create unique pages for different locales on your network, and to
customize the text and images on the pages.
Step 1
Select Guest Access > Web Portal Locale Table.
Step 2
In this table, click add to access the Captive Portal Customization page. To modify the locale, check the row and click
Edit or click Delete to delete.
You can create up to three different authentication pages with different locales on your network.
Step 3
In the Captive Portal Web Locale Parameters area, configure the following:
• Web Portal Locale Name — Enter a web locale name to assign to the page. The name can be from 1 to 32
alphanumeric characters.
Step 4
The Captive Portal Web Locale Parameters area displays the additional options for modifying the locale. The Guest
Access Instance Name cannot be edited. The editable fields are populated with default values. Configure the following
parameters:
• Guest Access Instance Name — Displays the name of the guest access instance.
• Background Image — Click Browse to choose the image. You can click Upload to upload the images for CP
instances.
• Logo Image — Click Browse to choose the logo image. You can click Upload to upload the logo images.
Cisco WAP125 Wireless-AC/N Dual Band Desktop Access Point with PoE
84
Access Control
Guest User Account

Cisco WAP125 Specifications

General

2.4 GHz	Yes
MIMO type	Multi User MIMO
Modulation	16-QAM, 64-QAM, 256-QAM, BPSK, CCK, QPSK
Number of users	64 user(s)
Networking standards	IEEE 802.3af, IEEE 802.11ac
Spread spectrum method	DSSS, OFDM
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	867 Mbit/s
Security algorithms	WPA, WPA2
Number of SSID supported	8
Supported network protocols	IPv6, NTP, HTTP, HTTPS
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Output current	1 A
Output voltage	12 V
Power plug type	Type C
AC input voltage	100 - 240 V
AC input frequency	50 Hz
Placement	Desk
Certification	UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, FCC 15.247, 15.407; RSS-210; EN 300.328, EN 301.893; AS/NZS 4268.2003; FCC 15.107 15.109, ICES-003, EN 301.489-1 -17
Product color	White
Recommended usage	Indoor
Cable lock slot type	Kensington
Antenna type	Internal
Antenna gain level (max)	5.63 dBi
Flash memory	128 MB
Internal memory	256 MB
Operating system installed	Linux
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 85 %
Country of origin	China
Quantity per pack	1 pc(s)
Package depth	188.976 mm
Package width	168.91 mm
Package height	80.01 mm
Package weight	1133.98 g

Weight and Dimensions

Width	123.19 mm
Height	31.75 mm
Weight	303.91 g