Cisco WRP500 Administration Guide

REVIEW DRAFT #1—CISCO CONFIDENTIAL
B-26
Cisco WRP500 Administration Guide
Appendix B Data Fields
Status
Administration > Diagnostics
Administration > Factory Defaults
Status
The Status module includes the following pages:
• “Status > Router” on page 27
• “Status > Mobile Network” on page 27
• “Status > Local Network” on page 28
• “Status > Wireless Network” on page 28
Ping Test
IP or URL Address The address of the PC whose connection you wish to
test.
Packet Size The packet size you want to use.
Default: 32 bytes
Times to Ping The number of times to run the ping test.
Traceroute Test
IP or URL Address The address of the PC whose connection you wish to
test.
Detect Active LAN Client(s)
Search Time The duration of the search in seconds: 5, 10, or 15.
Restore Router Factory Defaults To reset the router settings to the default values, select
Yes. Then click Save Settings. Any custom router
settings you have saved will be lost when the default
settings are restored.
Restore Voice Factory Defaults To reset the voice settings to the default values, select
Yes. Then click Save Settings. Any custom Voice
settings you have saved will be lost when the default
settings are restored.

Cisco WRP500 Specifications

General

Brand	Cisco
Model	WRP500
Category	Wireless Router
Language	English