Cisco WRP500 Administration Guide

REVIEW DRAFT #1—CISCO CONFIDENTIAL
A-16
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
Regional page
Voice tab > Regional page >
Distinctive Ring Patterns section
Secure Call Indication
Tone
Played when a call has been successfully switched to secure mode.
It should be played only for a short while (less than 30 seconds) and
at a reduced level (less than -19 dBm) so it does not interfere with
the conversation.
The default is 397@-19,507@-19;15(0/2/0,.2/.1/1,.1/2.1/2).
Feature Invocation
Tone
Played when a feature is implemented.
The default is 350@-16;*(.1/.1/1).
Ring1 Cadence Cadence script for distinctive ring 1.
The default is 60(2/4).
Ring2 Cadence Cadence script for distinctive ring 2.
The default is 60(.3/.2, 1/.2,.3/4).
Ring3 Cadence Cadence script for distinctive ring 3.
The default is 60(.8/.4,.8/4).
Ring4 Cadence Cadence script for distinctive ring 4.
The default is 60(.4/.2,.3/.2,.8/4).
Ring5 Cadence Cadence script for distinctive ring 5.
The default is 60(.2/.2,.2/.2,.2/.2,1/4).
Ring6 Cadence Cadence script for distinctive ring 6.
The default is 60(.2/.4,.2/.4,.2/4).
Ring7 Cadence Cadence script for distinctive ring 7.
The default is 60(.4/.2,.4/.2,.4/4).
Ring8 Cadence Cadence script for distinctive ring 8.
The default is 60(0.25/9.75).

Cisco WRP500 Specifications

General

Brand	Cisco
Model	WRP500
Category	Wireless Router
Language	English