Cisco WRP500

REVIEW DRAFT #1—CISCO CONFIDENTIAL
A-26
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
Regional page
Voice tab > Regional page >
Outbound Call Codec Selection Codes section
These codes automatically appended to the dial-plan. So no need to include them in dial-plan (although
no harm to do so either).
Prefer G711u Code Makes this codec the preferred codec for the associated call.
The default is *017110.
Force G711u Code Makes this codec the only codec that can be used for the associated
call.
The default is *027110.
Prefer G711a Code Makes this codec the preferred codec for the associated call.
The default is *017111
Force G711a Code Makes this codec the only codec that can be used for the associated
call.
The default is *027111.
Prefer G729a Code Makes this codec the preferred codec for the associated call.
The default is *01729.
Force G729a Code Makes this codec the only codec that can be used for the associated
call.
The default is *02729.