REVIEW DRAFT #1—CISCO CONFIDENTIAL
A-45
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
User page
Voice tab > User page >
Distinctive Ring Settings section
Caller number patterns are matched from Ring 1 to Ring 8. The first match (not the closest match)
will be used for alerting the subscriber.
Voice tab > User page >
Ring Settings section
Ring1 - 9 Caller Caller number pattern to play Distinctive Ring/CWT 1, 2, 3, 4, 5, 6,
7, 8, or 9.
The default is blank.
Default Ring Default ringing pattern, 1 – 8, for all callers.
The default is 1.
Default CWT Default CWT pattern, 1 – 8, for all callers.
The default is 2.
Hold Reminder Ring Ring pattern for reminder of a holding call when the phone is
on-hook.
The default is None.
Call Back Ring Ring pattern for call back notification.
The default is None.
Cfwd Ring Splash Len Duration of ring splash when a call is forwarded
(0 – 10.0s).
The default is 0.
Cblk Ring Splash Len Duration of ring splash when a call is blocked (0 – 10.0s).
The default is 0.
VMWI Ring Splash
Len
Duration of ring splash when new messages arrive before the
VMWI signal is applied (0 – 10.0s).
The default is .5.
To Next Page
Loading...
Need help?
General
