Cisco WRP500 Administration Guide

REVIEW DRAFT #1—CISCO CONFIDENTIAL
A-42
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
User page
• “Ring Settings section” section on page A-45
When a call is made from Line 1 or Line 2, the WRP500 uses the user and line settings for that line; there
is no user login support. Per user parameter tags must be appended with [1] or [2] (corresponding to line
1 or 2) in the configuration profile. It is omitted below for readability.
Voice tab > User page >
Call Forward Settings section
Voice tab > User page >
Selective Call Forward Settings section
Cfwd All Dest Forward number for Call Forward All Service
The default is blank.
Cfwd Busy Dest Forward number for Call Forward Busy Service. Same as Cfwd All
Dest.
The default is blank.
Cfwd No Ans Dest Forward number for Call Forward No Answer Service. Same as
Cfwd All Dest.
The default is blank.
Cfwd No Ans Delay Delay in sec before Call Forward No Answer triggers. Same as
Cfwd All Dest.
The default is 20.
Cfwd Sel1- 8 Caller Caller number pattern to trigger Call Forward Selective 1, 2, 3, 4, 5,
6, 7, or 8.
The default is blank.
Cfwd Sel1 - 8 Dest Forward number for Call Forward Selective 1, 2, 3, 4, 5, 6, 7, or 8.
Same as Cfwd All Dest.
The default is blank.
Block Last Caller ID of caller blocked via the Block Last Caller service.
The default is blank.

Cisco WRP500 Specifications

General

Brand	Cisco
Model	WRP500
Category	Wireless Router
Language	English