Cisco WRP500 Administration Guide

REVIEW DRAFT #1—CISCO CONFIDENTIAL
A-21
Cisco WRP500 Administration Guide
Appendix A Advanced Voice Fields
Regional page
Blind Transfer Code Begins a blind transfer of the current call to the extension specified
after the activation code.
The default is *98.
Call Back Act Code Starts a callback when the last outbound call is not busy.
The default is *66.
Call Back Deact Code Cancels a callback.
The default is *86.
Call Back Busy Act
Code
Starts a callback when the last outbound call is busy.
The default is *05
Cfwd All Act Code Forwards all calls to the extension specified after the activation
code.
The default is *72.
Cfwd All Deact Code Cancels call forwarding of all calls.
The default is *73.
Cfwd Busy Act Code Forwards busy calls to the extension specified after the activation
code.
The default is *90.
Cfwd Busy Deact
Code
Cancels call forwarding of busy calls.
The default is *91.
Cfwd No Ans Act
Code
Forwards no-answer calls to the extension specified after the
activation code.
The default is *92.
Cfwd No Ans Deact
Code
Cancels call forwarding of no-answer calls.
The default is *93.
Cfwd Last Act Code Forwards the last inbound or outbound calls to the extension
specified after the activation code.
The default is *63.
Cfwd Last Deact Code Cancels call forwarding of the last inbound or outbound calls.
The default is *83.
Block Last Act Code Blocks the last inbound call.
The default is *60.
Block Last Deact
Code
Cancels blocking of the last inbound call.
The default is *80.

Cisco WRP500 Specifications

General

Brand	Cisco
Model	WRP500
Category	Wireless Router
Language	English