Cisco WRP500 Administration Guide

REVIEW DRAFT #1—CISCO CONFIDENTIAL
B-2
Cisco WRP500 Administration Guide
Appendix B Data Fields
Setup
Static IP:
• Internet IP Address: The IP address of your
WRP500, as seen from the Internet.
• Subnet Mask: The subnet mask, as seen by users on
the Internet (including your service provider).
• Default Gateway: The IP address of your service
provider server.
PPPoE:
• User Name: The user name for your account with
your service provider.
• Password: The password for your account with
your service provider.
• Service Name (optional): For the PPPoE
connection type, the service name (if provided).
• Connect on Demand: For a PPPoE, PPTP, L2TP, or
Telstra Cable connection type, a feature that allows
your WRP500 to re-establish a terminated
connection when a user attempts to access the
Internet.
• Max Idle Time: When Connection on Demand is
enabled, use the Max Idle Time field to specify the
period of inactivity that causes a connection to
terminate.
Default: 5 minutes
• Keep Alive: a feature that allows your WRP500 to
check your Internet connection at a specified
interval (Redial Period). If you are disconnected,
then the WRP500 automatically re-establishes your
connection.
• Redial Period: When Keep Alive is enabled, this
period is the interval in seconds at which the
Internet connection is checked.
Default: 30 seconds

Cisco WRP500 Specifications

General

Brand	Cisco
Model	WRP500
Category	Wireless Router
Language	English