Cisco WS-C3560E-24PD-E User Manual

2-608
Catalyst 3560 Switch Command Reference
78-16405-05
Chapter 2 Catalyst 3560 Switch Cisco IOS Commands
speed
Examples This example shows how to set speed on a port to 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed 100
This example shows how to set a port to autonegotiate at only 10 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10
This example shows how to set a port to autonegotiate at only 10 or 100 Mbps:
Switch(config)# interface gigabitethernet0/1
Switch(config-if)# speed auto 10 100
You can verify your settings by entering the show interfaces privileged EXEC command.
Related Commands Command Description
duplex Specifies the duplex mode of operation.
show interfaces Displays the statistical information specific to all interfaces or to a specific
interface.

Cisco WS-C3560E-24PD-E Specifications

General

Brand	Cisco
Model	WS-C3560E-24PD-E
Category	Switch
Language	English