Chapter 3 Disassembly and Maintenance
3-5 Quick Detachment of Major Parts
CL-E720DT 3-8
3-5-2. SA Platen
1. Open the “SA Top Cover” Block.
2. Push the “Lever Head Lock” () and open the Head Block ().
3. While pressing the part “A” of the “SA Platen” (), raise its right end by about indicated
degrees, and then remove the “SA Platen” by lifting it upwardly.
Note on reassembling:
• After mounting the “SA Platen”, be sure that it is securely engaged with the main body.
)
To Next Page
Loading...
