Citrix ADC MPX 8005 User Manual

Citrix ADC MPX
Perform a warm restart remotely from another computer on the network
ipmitool –U <bmc_gui_username> –P <bmc_gui_password> –H <bmc IP address> mc
reset cold
Perform a core dump
If the appliance fails or becomes unresponsive, you can remotely perform a core dump. This proce‑
dure has the same eect as pressing the NMI button on the back panel of the appliance.
Perform a core dump by using the GUI
1. In the Menu bar, click Remote Control.
2. Under Options, click NMI, and then click Initiate NMI.
Perform a core dump remotely from another computer on the network by using the shell
At the shell prompt, type:
ipmitool -U <bmc_gui_username> -P <bmc_gui_password> -H <bmc IP address>
chassis power diag
Restore the BMC configuration to factory defaults
September 19, 2022
You can restore the BMC to its factory‑default settings, including deleting the SSL Certificate and SSL
key.
Reset the configuration to factory defaults by using the GUI
1. Navigate to Maintenance > Factory Default.
2. Click Restore.
Reset the configuration to factory defaults by using the shell
At the shell prompt, type:
ipmitool raw 0x30 0x40
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 173

Citrix ADC MPX 8005 Specifications

General

Brand	Citrix
Model	ADC MPX 8005
Category	Network Hardware
Language	English