Citrix ADC MPX 8005 User Manual

Citrix ADC MPX
LED Color LED Indicates
OFF No power to any power supply on the
appliance.
Flashing RED No power to this power supply.
Flashing GREEN Power supply is in standby mode.
GREEN Power supply is functional.
RED Power supply failure.
Flashing RED and GREEN Warning; (OVP/UVP/OCP/OTP/Fan); OVP = Over
Voltage Protection; UVP = Under Voltage
Protection; OCP = Over Current Protection;
OTP = Over Temperature Protection
• Disable alarm button. Press this button to silence the power alarm when one of two power
supplies loses input power or when a power supply is malfunctioning.
• Non‑Maskable Interrupt (NMI) Button, used at the request of Technical Support to initiate a core
dump. To press this red button, which is recessed to prevent unintentional activation, use a pen,
pencil, or other pointed object. The NMI Button is also available remotely over the network in
the LOM GUI, in the Remote Control menu. For more information about the lights out manage‑
ment port of the appliance, see Lights out management port of the Citrix ADC MPX appliance.
Citrix ADC T1010
August 18, 2020
The Citrix ADC T1010 is a 1U appliance, with a single‑core processor, and 32 GB of memory.
The following figure shows the front panel of the T1010 appliance.
Figure 1. Citrix ADC T1010 front panel
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 96

Citrix ADC MPX 8005 Specifications

General

Brand	Citrix
Model	ADC MPX 8005
Category	Network Hardware
Language	English