Citrix ADC MPX
Press the switch for five seconds to shut o the power.
• Removable Hard Disk Drive that is used to store user data.
• USB Port (reserved for a future release).
• Non‑maskable interrupt (NMI) Button that is used at the request of Technical Support and pro‑
duces a core dump on the appliance. Use a pen, pencil, or other pointed object to press this red
button, which is recessed to prevent unintentional activation.
• Disable alarm button. This button is functional only when the appliance has two power sup‑
plies.
Press this button to stopthe power alarm from sounding when either of the following conditions
is true:
– You have plugged the appliance into only one power outlet.
– One power supply is malfunctioning, and you want to continue operating the appliance
until it is repaired.
• Two power supplies, each rated at 450 watts, 110–220 volts. Maximum power consumption is
360 watts.
For information about installing the rails, rack mounting the hardware, and connecting the cables,
see “Installing the Hardware.”
For information about performing the initial configuration of your appliance, see “Initial Configura‑
tion.”
Citrix ADC MPX 11500, MPX 13500, MPX 14500, MPX 16500, MPX 18500,
and MPX 20500
September 19, 2022
Note: This platform has reached its end of life.
The Citrix ADC models MPX 11500/13500/14500/16500/18500/20500 are 2U appliances. Each model
has two 6‑core processors for a total of 12 physical cores (24 cores with hyper‑threading), and 48 GB
of memory.
The following figure shows the front panel of the MPX 11500/13500/14500/16500/18500/20500 appli‑
ance.
Figure 1. Citrix ADC MPX 11500/13500/14500/16500/18500/20500 appliance, front panel
© 1999–2023 Cloud Soware Group, Inc. All rights reserved. 46
To Next Page
Loading...
Need help?
General
