FreeSpeak Edge | User Guide
6.3 Beltpack bottom connectors 51
6.4 Beltpack batteries and power 51
6.5 Menu mode 53
6.6 Use/persist local settings (beltpacks) 53
6.7 Edge beltpack menu access 54
6.8 FreeSpeak Edge beltpack menus 56
7 Operating the Edge transceiver 71
7.1 IP rating (Protection Marking) 71
7.2 FreeSpeak Edge transceiver connector panel 72
7.3 Powering the transceiver 72
7.4 Edge transceiver status LEDs 73
7.5 Reset the transceiver to default 75
7.6 Port security settings 76
7.7 Network and synchronization 76
7.8 General network and switching rules 77
7.9 Spare parts 77
8 Upgrading FreeSpeak Edge 79
8.1 Upgrading FreeSpeak Edge transceivers 79
8.2 Upgrading FreeSpeak Edge beltpacks 80
9 Specifications 82
9.1 Transmission method 82
9.2 FreeSpeak Edge beltpack 82
9.3 FreeSpeak Edge transceiver 84
9.4 Transceiver models (regional variations) 85
9.5 FreeSpeak Edge battery charger and battery 85
9.6 Notice about specifications 86
10 Regulatory compliance 87
10.1 Part numbers and regulatory models 87
10.2 FCC notice 88
10.3 FCC/IC/EC RF exposure warning 88
10.4 Industry canada compliance statement 89
10.5 Korean notice 89
10.6 Japan notice 90
10.7 Australia compliance statement 90
10.8 New Zealand compliance statement 90
10.9 European Union (CE mark) 90
Page 4
To Next Page
Loading...
Need help?
General
