EasyManua.ls Logo

CLEARPATH OTTO 600 - Page 10

Default Icon
51 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Label Title Description Label Title Description
Grounding
electrical
hazard
Improper grounding
of OTTO chargers can
result in a potential
shock risk.
Pinching risk
Keep hands and other
objects clear of pinch
points at all times.
Keep clear of all
docking robots.
Harmful
battery
substance
Robot batteries
contain harmful
material. Always
use proper handling
procedures when
handling robot
batteries.
Crushing risk
Objects or personnel
can be crushed
between robots and
another object.
Keep hands and other
objects clear of crush
points at all times.
Keep clear of all
docking robots.
Burn hazard
Robot PC heat sinks
and robot motors can
become extremely
hot during operation.
Impact hazard
OTTO robots
travelling through a
facility can potentially
impact objects and
personnel.
Keep clear of all
docking robots.
Manual load
handling
Always use ergonomic
technique when
manually lifting loads.
Robot
movement
Robots may suddenly
begin moving
autonomously or
when being driven
manually.
Always be aware of
OTTO products and
their potential for
movement.
Tripping
hazard
OTTO products may
pose a tripping
hazard.
Shock hazard
Improper use/
disconnection of a
component with this
label can result in a
potential shock risk.
Automated
mobile robot
traffic
Be aware that robots
can be anywhere in
the operating area
of the facility at any
time.
Personal
Protective
Equipment
(PPE)
requirement
Proper PPE must be
worn, including safety
footwear (ie. steel
toe) around OTTO
products.
Insulated gloves
and/or tools are
recommended when
performing any
maintenance on
OTTO products.
Lock- out/tag-
out
When performing
maintenance on an
electrically powered
OTTO product,
always follow the
applicable lock-out/
tag-out procedure.
Do not ride
Robots are not
designed for carrying
personnel and should
not be ridden at any
time.
Do not step
The labeled
component must not
be used as a step.
OTTO 600 - OMM-000117-A
© Clearpath Robotics Inc. 2024. All rights reserved. CLEARPATH and OTTO are trademarks of Clearpath Robotics Inc.
All other product and company names listed are trademarks or trade names of their respective companies. 10

Table of Contents