General hazards
WARNING
•
BURN or SHOCK HAZARD! Never use this product if the enclosure or any of the
connectors are broken, cracked, open, or show any other indication of damage.
•
SHOCK HAZARD! Always perform the lock-out/tag-out procedure at the facility or on
the product before inspecting, servicing, cleaning, removing components, or opening
any enclosure.
•
FIRE HAZARD! Observe all safety precautions when using flammable fluids.
•
CRUSH HAZARD! Keep a safe distance from suspended loads.
•
IMPACT HAZARD! Always be aware of operation limitations such as floor grades,
negative and overhanging obstacles, and the LiDAR obstacle detection plane.
•
FIRE OR SHOCK HAZARD! Never use a power cord or cable that appears damaged.
CAUTION
•
Never operate the product after faulty parts are identified.
•
Never expose OTTO products to rain, condensation, or standing water. Store
products in a clean and dry location.
•
Use appropriately rated lift equipment and follow safe lifting procedures as defined
by the facility when lifting the product.
•
Wear appropriate safety equipment when operating or working around the product.
•
TRIP HAZARD! Take care when walking around the product.
•
Only qualified personnel should perform installations, maintenance, and inspections.
•
Only use the attachments, accessories, tools, replacement parts, and cleaning
products approved by OTTO.
•
Installation must be performed by an electrically qualified person to ensure
compliance with local electrical codes.
•
PINCH HAZARD! Keep objects and body parts away from pinch points.
•
FIRE HAZARD! Observe all safety precautions when using flammable fluids.
OTTO 600 - OMM-000117-A
© Clearpath Robotics Inc. 2024. All rights reserved. CLEARPATH and OTTO are trademarks of Clearpath Robotics Inc.
All other product and company names listed are trademarks or trade names of their respective companies. 6
To Next Page