CB FALCON
105 750-265
APPENDIX C: LOCKOUT AND HOLD
CODES
To support the recommended Troubleshooting, the Falcon has
an Alert File. Review the Alert history for possible trends that
may have been occurring prior to the actual Lockout.
Note Column: H= Hold message; L=Lockout message; H or L=
either Hold or Lockout depending on Parameter Configuration
Table 49. Falcon Lockout and Hold Codes.
Code Description Recommended Troubleshooting of Lockout Codes NOTE
Safety Data Faults
1 Unconfigured safety data 1. New Device, complete device configuration and safety
verification.
2. If fault repeats, replace module.
L
2 Waiting for safety data verification 1. Device in Configuration mode and safety parameters
need verification and a device needs reset to complete
verification.
2. Configuration ended without verification, re enter
configuration, verify safety parameters and reset device to
complete verification.
3. If fault repeats, replace module.
L
Internal Operation Errors