| CAPTO USER MANUAL 3
NFPA CERTIFICATION INFORMATION
MEETS THE PULLEY AND ROPE GRAB REQUIREMENTS OF NFPA 1983,
INCORPORATED IN THE 2022 EDITION OF NFPA 2500.
336011 CAPTO, 11 MM
• GENERAL USE (G) MBS 36 KN (8,093 LBF) PULLEY
• GENERAL USE (G), ROPE GRAB, Ø 10.5 - 11 MM
THIS ROPE GRAB DEVICE HAS PASSED THE MANNER OF FUNCTION TEST USING
THE FOLLOWING ROPES:
• CMC RESCUE, INC., CMC G11™, PART# 28313X, 11 MM
• TEUFELBERGER FIBER ROPE CORP, KMIII, PART# C330X-05-00600, 10.5 MM
NFPA CERTIFICATION AS A PULLEY ONLY APPLIES WHEN USING THE BECKET AS
THE PULLEY ATTACHMENT POINT.
FOR INFORMATION ON DEVICE PERFORMANCE WHEN USING OTHER LIFE
SAFETY ROPES, PLEASE CONTACT CMC OR REFER TO CAPTO TECHNICAL
SECTION AT CMCPRO.COM
To Next Page
Loading...
