Chapter 5: Maintenance and troubleshooting
98-129217-D Uploading software using the TMA 124
If you have problems with your Firewall settings, please refer to the TMA quick guide, also
available on the Self Service Center under Downloads > Maritime > ThraneLINK
Management Application.
To update software with the TMA
To update software in a ThraneLINK product, do as follows:
1. Connect the PC to the LAN with the Thrane & Thrane products for which you want to
update software.
2. Click the TMA icon on the PC’s desktop. The program starts and displays the ThraneLINK
products found on the network.
If a Windows Security Alert pops up click Allow access (Windows 7) or Unblock
(Windows XP).
3. Insert a USB memory stick with the new software version (placed in the root) into a USB
connector in the PC.
1
The TMA automatically discovers the new software version(s) and a software update
icon flashes next to the unit(s) for which the software can be installed.
4. From the main page of the TMA, select the product you want to update.
5. Select Software update at the bottom of the product page.
Check that the new software version is correct.
6. Select Update.
The progress of the software update is shown in percent under the product icon. When
installation is completed, a check mark appears instead.
1. If the new software is not automatically found, you can point to the location of the
software. Select the tool icon in the Software update page and enter the location of
the software.
To Next Page
Loading...
