Chapter 4: Using the web interface
98-129217-D Setting up the interfaces 83
Call forwarding
You can set up the terminal to automatically forward incoming calls to another phone number.
This information is saved in the BGAN network so it is available when the call cannot be put
through and must be forwarded. This service is usually set up by the airtime provider.
To set up call forwarding, do as follows:
1. Select SETTINGS > Common > Call forward from the left navigation pane.
2. Click OK next to Read current settings to display the phone numbers for call forwarding
for the subscription. These numbers are operator controlled and come with your airtime
subscription (default). A message saying Operation in progress, please wait is
displayed.
3. For each call type, select Enabled next to the situation(s) in which you want to forward
incoming calls.
4. Next to the enabled items, type in the phone number you want to forward the call to.
5. If you have selected Forward if no reply, select from the drop-down list the period of
time the system should wait before forwarding the call.
6. Click Apply.
Forward when busy is not available if Multi-voice is
enabled. This setting must be enabled before enabling
Multi-voice.
To Next Page
Loading...
Need help?
General