Chapter 2: Getting started
98-129217-D Standard connection to the Internet (default) 22
Activating the connection using the Thrane IP Handset
To activate the connection using the Thrane IP Handset, do as follows:
1. Connect the Thrane IP Handset to one of the LAN ports (preferably port 1). The handset
starts up automatically.
2. Select Menu > BGAN in the handset.
3. Select Connect.
4. Use the left/right keys to find the network user group for the application you want to start.
5. Press Start to start the connection.
A confirmation window is displayed.
6. Press Yes to continue.
The Thrane IP Handset sends a command to the terminal to start the selected connection.
7. Check the connection, e.g. by entering a web site from a connected computer.
To Next Page
Loading...
