Manpack Transceiver 2110 series Repair Guide 115
Options
The figures in this section are required for identifying a fitted option. If an option is also
supported in the firmware, ensure that the option is not active at the time of testing, for
example, the voice encryptor is not active.
Figure 36: GPS receiver
NOTE
Fitted options are indicated on the label on the back panel of the
transceiver.
For information on option... See...
GPS Receiver Figure 36
Connector for External GPS Antenna Figure 37
Voice Encryptor Figure 38
Filters Figure 39
To Next Page
Loading...
Need help?
General
