C001537_04_CR2 User Manual - 11
Save Settings
Figure 2.9
Figure 2.10
Overview
This version of the CR2 features a Bluetooth® wireless radio. The radio allows for point to point
wireless communication with other Bluetooth devices that support serial port protocol (SPP).
The following guide will give you general instructions on connecting your CR2 to a desktop or
laptop computer with a Bluetooth radio.
Connecting With A QuickConnect Code
The easiest way to connect to a Bluetooth device is to visit Code’s web site and create a QuickConnect
Code that is specific to your device (figure 2.9). This code will link your CR2 directly to the desired
Bluetooth device. To create a QuickConnect Code, you will need to know the Bluetooth address
(often referred to as the BD_ADDR) of that device. You can usually find the 12-character Bluetooth
address somewhere on the device near the device’s serial number (see figure 2.10).
If you purchased a CodeXML Bluetooth Modem or a Belkin® Bluetooth adapter from Code or from an
authorized distributor, a QuickConnect Code is included. The CodeXML Bluetooth modem is a simple
hardware solution for customers who wish to enjoy the benefits of cordless data collection without
modifying existing applications or installing software. Please visit www.codecorp.com for more
information. If you bought a Bluetooth adapter separately and wish to create a QuickConnect Code,
please visit Code web site at:
http://www.codecorp.com/support/bdaddr.php.
Note: While installing the Bluetooth Configuration Manager software that came with the adapter, make
sure to take note of the Virtual COM Port the software has assigned for the adapter (e.g. COM 10). This
is the COM Port your CR2 will connect through.
Scan the RF One Way - Max Range code (see discussion on next page) below then the QuickConnect
Code and your CR2 will automatically connect. You should also scan the Save Settings code if you want
to save these settings (Note: If the CR2 unit powers off without scanning the Save Settings code, you will
lose your settings).
RF One Way Mode (Max Range) Save Settings
2.4 - Bluetooth Radio Overview
To Next Page
Loading...
Need help?
General
