C001537_04_CR2 User Manual - 27
Save Settings
4.8 - Code 128 Symbology
Scan the following codes to enable/disable Code 128 symbology settings:
Code 128 On (Default) Code 128 Off
Code 128 Short Margin On Code 128 Short Margin Off (Default) Sample Code 128 Code
Note: When Codablock F and Code 128 decoding are enabled, there is some danger of mistakenly
decoding a damaged Codablock F symbol as a Code 128 symbol. Therefore, Code 128 decoding
should be disabled when Codablock F decoding is enabled.
4.7 - Code 93 Symbology
4.9 - Composite Symbologies
Scan the following codes to enable/disable Composite symbology settings:
Composite On Composite Off (Default)
Scan the following codes to enable/disable Code 93 symbology settings:
Code 93 On (Default) Code 93 Off Sample Code 93 Code
Scan the following codes to enable/disable Code 11 symbology settings:
Code 11 On (Default) Code 11 Off Code 11 Checksum 1 digit
Code 11 Checksum 1 Digit & Stripped from Result Code 11 Checksum 2 Digit & Stripped from Result
Code 11 Sample
4.6 - Code 39 Symbology (con’t)
Code 39 Short Margin On Code 39 Short Margin Off (Default) Sample Code 39 Code
To Next Page
Loading...
Need help?
General
