Code Reader 1200 User Manual

C001537_04_CR2 User Manual - 60
Save Settings
10.1 - Prefix Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your
reader before scanning the prefix codes. If you scan more than one prefix you will receive each scanned
prefix in your scanned data (i.e. If you scan comma prefix twice, you will get two comma prefixes). Scan
the following codes to set appropriate prefix.
Prefix - Comma Prefix - Space Prefix - Tab (USB Mode)
Prefix - Tab Prefix - Erase Prefix - Carriage Return Line Feed
Note: If you require a special configuration, please contact Code at (801) 495-2200.
10.2 - Suffix Settings
If you scan the following codes, you may lose your current settings. Make sure to save settings on your
reader before scanning the Suffix codes. If you scan more than one suffix you will receive each scanned
suffix in your scanned data (i.e. If you scan comma suffix twice, you will get two comma suffixes). Scan
the following codes to set appropriate suffix:
Suffix - Carriage Return Suffix - Comma Suffix - Line Feed
Suffix - Carriage Return Line Feed Suffix - Space Suffix - Enter
Only Use with
Serial Applications
Only Use with
Serial Applications
Only Use with
Serial Applications
Only Use with
USB or Keyboard
Mode
Only Use with
Serial Applications

Code Reader 1200 Specifications

General

Brand	Code
Model	Reader 1200
Category	Barcode Reader
Language	English