Need help?Do you have a question about the coM.sat ISDN Basic and is the answer not in the manual?
General| Brand | coM.sat |
|---|---|
| Model | ISDN Basic |
| Category | Network Router |
| Language | English |
Configure device settings using the coMsat.exe Windows application via file cards.
Configure COM port, speed, and authentication for device connection.
Set ISDN link layers for NT or TE mode operation and point-to-point/multipoint connections.
Configure GSM/UMTS options, including prepaid credit supervision and SMS notifications.
Define routing destinations for number prefixes and provider prefixes based on time.
Determine route (GSM/ISDN/PBX) based on called number prefixes and fallback options.
Configure handling of calls without CLIP, dialling mode, and rejection of specific callers.
Configure bearer capability, channel assignment, progress indicator, and dial timeout settings.
Configure data and fax connections via PC, enabling PC to act as modem.
Extend gateway functionality with call hold, retrieve, and transfer services.
Virtual PBX features extend gateway functionality with call hold, retrieve, and transfer.
Configure digits for invoking call hold, retrieve, transfer, and set transfer code.
Configure settings for channel 1 and channel 2, including PIN, AOC Timer, and call handling.
Install com.sat ISDN Basic as an exchange (NT) at the external S0 bus.
Operate as an internal extension (TE) on the internal S0 bus, like a standard ISDN device.
Install as NT at external S0 bus and TE at ISDN network termination for routing.
Check configuration and update firmware via USB or remote GSM servicing.
Establish USB link between PC and device for configuration changes and firmware updates.
Set up link via GSM network using SMS for callback and data link establishment.
To Next Page