coM.sat ISDN Basic
created: page: file:
16/01/09 22 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!
3.3.2 ISDN Configuration
Figure 8: ISDN Configuration
The settings required for operation with the telephone system are made in the "ISDN
Cfg" tab. When configuring the ISDN link, layers 1 to 3 are independently set for
operation of the coM.sat ISDN Basic in NT or TE mode.
NT-Mode operation
In this mode the device presents itself to the telephone system as the ISDN network
operator's network terminator. The connection to the coM.sat ISDN Basic is set up as
a point-to-point or point-to-multipoint connection.
To Next Page
Loading...