coM.sat ISDN Basic
created: page: file:
16/01/09 64 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!
3.3.16.1 Receive SMS
To receive SMS messages, first select the reception channel and then click on the
”Query” button. SMS messages that in the meantime have been stored on the SIM
card for this recipient are now called up and shown in the “Received SMS“ list.
However, only the date received and the phone number of the sender are shown in
this box. The content of an SMS is displayed if an SMS is selected using the mouse
pointer. The message text then appears in the box below, the phone number of the
sender is displayed in the “Phone Number“ box.
The following property must be noted for the receipt of SMS messages. As the
received SMS messages are stored on the SIM card, the available memory is limited.
However, to ensure access to the device via remote servicing, the oldest message is
always deleted (if “Ignore SMS” is deactivated) to ensure that sufficient memory
space is available for a new incoming message. The precise remote servicing
sequence is described in the Remote Servicing chapter.
3.3.16.2 Send SMS
If an SMS message is to be sent, first select the channel and then enter the message
text in the “Message Text“ box, whereby the message must not contain more than
160 characters. To send the message, enter the number of the recipient in the
“Phone Number“ box and then press the “Send“ button. The message is then sent.
To Next Page
Loading...
Need help?
General