coM.sat ISDN Basic
created: page: file:
16/01/09 81 coMsat ISDN Basic Manual V2.7.doc
Note Protection Mark according to DIN 34!
4.4 Transmit SMS
“Short messages“ can also be received and sent using the coM.sat ISDN Basic by
connecting a PC on which the coMsat.exe application is installed to the USB port of
the coM.sat ISDN Basic. After the link between the PC and the coM.sat ISDN Basic
has been set up, the SMS card via which the SMSs are received and sent is called
up.
Note: To do this, it is first necessary for the service centre numbers to be configured
in the GSM channel card(s).
After selecting a channel, the SMs are simply received by clicking on the ”Query”
button, thereby reading the short messages from the SIM card. Any incoming
messages are then shown in the upper box as a string in which the date, time and
telephone numbers of the sender are displayed. The actual message text is
displayed in the lower box when the message in the upper box is selected with the
mouse. The text of a message can then be marked with the mouse and copied into
the clipboard using the standard Windows keyboard shortcut <CTRL> <C> to make it
available to another Windows application.
To send a short message, the text is entered in the lower box or transferred from the
clipboard using the keyboard shortcut <CTRL> <V>. Then the transmission channel
has to be selected and the number of the recipient entered. The short message is
then transmitted by pressing the ”Send” button. Supplementary information can also
be found in Chapter 3.3.16.
4.5 Fax transmission via PC
A PC on which an application is installed and with which it is possible to exchange
fax messages (e.g. WinFax Pro) is connected to the serial port of the coM.sat ISDN
Basic. The fax messages are now exchanged from this PC via the coM.sat ISDN
Basic to a fax machine and vice versa or even from a coM.sat ISDN Basic with
connected PC to another coM.sat ISDN Basic with connected PC. To transmit fax
messages, a SIM card must be used on which the fax message transmission option
has been authorised.
4.5.1 Preparation of the PC for fax transmissions
Before installing the fax program on the PC to be used for the transmission of fax
messages, the coM.sat ISDN Basic must first be installed as a modem. This required
the “ISDNPlus.inf“ file included in the software provided. To install the modem, call
up Windows control panel and select “Modems“. The “Modem Properties“ window
then opens. Select the “Add“ button and the “Install New Modem“ window opens.
Select the “Select Modem (no automatic identification) “ option and then press
“Next“. Another “Install New Modem“ window now opens in which the “Disc“ button
is pressed. The “Install from Disc“ window now appears at the foreground. Now
click the “Browse“ button in this window. The path to the directory in which the
“ISDNPlus.inf“ file is stored is then displayed in the following “Open“ window and
accepted with the OK button. The window now closes again and the “OK“ button
To Next Page
Loading...
Need help?
General