ComAp InteliDrive Lite

ID-FLX Lite & Telecom Global Guide
134
Setpoint group ATTsettings Related FW 2.5.0
Range [units] 0 .. 10000 [-]
Default value 10000 YES
Step 1
Comm object 11855 Related applications
Description
Load limit regulator PI output upper limit.
Value of this Setpoint should be given in value of quantity without decimal point.
Example: When AIN is configured in such way that Load limit set on 5V to maintain the value
8.54bar, then the value inserted to this Setpoint is 854.
LoadUpLimit
6 back to List of setpoints
Setpoint group ATTsettings Related FW 2.5.0
Range [units] 0 .. 10000 [-]
Default value 0 YES
Step 1
Comm object 11856 Related applications
Description
Load limit regulator PI output low limit.
Value of this Setpoint should be given in value of quantity without decimal point.
Example: When AIN is configured in such way that Load limit set on 5V to maintain the value
8.54bar, then the value inserted to this Setpoint is 854.
LoadDnLimit
6 back to List of setpoints
Setpoint group ATTsettings Related FW 2.5.0
Range [units] -200.0 .. +200.0 [%]
Default value 0 YES
Step 0.1
Comm object 11857 Related applications
Description
This is setpoint is giving Load limit gain factor.
Load Gain
6 back to List of setpoints