ComAp InteliDrive Lite Global Guide

ID-FLX Lite & Telecom Global Guide
99
Setpoint group Basic settings Related FW 2.5.0
Range [units] [Pickup, AIO-AIN1, AIO-AIN2, AIO-AIN3, AIO-AIN4]
Default value -
Step -
Comm object 12142 Related applications
Description
Switch from where the RPM is measured. When source is Analog input the converted value is going to be in
RPM range.
RPM source
6 back to List of setpoints
Setpoint group Basic settings Related FW 2.5.0
Range [units] ENABLED /DISABLED [-]
Default value ENABLED -
Step -
Comm object 14599 Related applications N/A
Description
This setpoint is used to enable or disable fail detect function of RA15 module which enables or disables
alarm announcement in case RA15 is configured but not communicating.
RA-FailDetect
6 back to List of setpoints

ComAp InteliDrive Lite Specifications

General

Brand	ComAp
Model	InteliDrive Lite
Category	Controller
Language	English