ComAp InteliLite 4 AMF 20

InteliLite4 AMF20 Global Guide
20
3 Applications overview
3.1 AMF – Automatic Mains Failure Start 20
3.2 MRS – Manual Remote Start 21
6 back to Table of contents
3.1 AMF – Automatic Mains Failure Start
The typical schematic of Automatic Mains Failure Start application is shown below. The controller controls
two breakers – a mains breaker and a generator breaker. Feedback from both breakers is not necessary.
InteliLite 4 controllers can also work without breaker feedback.
Image 3.1 AMF application overview