InteliLite4 AMF20 Global Guide
414
Maintenance Timer 3 Interval
Value group Statistics Related FW 1.3.0
Units days
Comm object 16389 Related applications AMF,MRS
Description
Countdown until next maintenance 3.
Statistic value for Maintenance Timer 3 Interval (page 259).
6 back to List of values
Num E-Stops
Value group Statistics Related FW 1.3.0
Units [-]
Comm object 11195 Related applications AMF,MRS
Description
Emergency stop alarms counter.
Note: This value counts only in case that Gen-set was stopped due to E-Stop or Emergency Stop.
6 back to List of values
Shutdowns
Value group Statistics Related FW 1.3.0
Units [-]
Comm object 11196 Related applications AMF,MRS
Description
Shutdown alarms counter. This counter counts all occurrences of a shutdown alarm, not only real
shutdowns of the Gen-set, i.e. the counter is increased by 2 if two shutdown alarms appear
simultaneously.
6 back to List of values
Total Fuel Consumption
Value group Statistics Related FW 1.3.0
Units L
Comm object 9040 Related applications AMF,MRS
Description
Value containing total amount of consumed fuel by engine. The controller automatically updates this value
every 30s. The controller can calculate it in three ways:
Direct reading from ECU
Calculation based on actual fuel consumption reading from ECU
Calculation from fuel level drop in tank (using Fuel Level Analog Input)
6 back to List of values
To Next Page
Loading...
