ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
302
Setpoint group Scheduler Related FW 1.9.0
Range [units] DD/MM/YYYY [-]
Default value 1.1.2015 Alternative config NO
Step [-]
Comm object 24553 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Actual date adjustment.
Date
6 back to List of setpoints
Setpoint group Scheduler Related FW 1.9.0
Range [units] 0 .. 240 [min]
Default value 60 min Alternative config NO
Step 1 min
Comm object 8979 Related applications AMF, MRS
Config level Standard
Setpoint visibility Always
Description
Time interval for periodic history records.
Note: History record is made only when engine is running.
Time Stamp Period
6 back to List of setpoints
Setpoint group Scheduler Related FW 1.9.0
Range [units] Disabled / Winter / Summer / Winter - S / Summer - S [-]
Default value Disabled Alternative config NO
Step [-]
Comm object 8727 Related applications AMF, MRS
Config level Advanced
Setpoint visibility Always
Description
Behavior of switching between winter and summer time.
Disable Automatic switching between summer and wintertime is disabled.
Winter
(Summer)
Automatic switching between summer and wintertime is enabled and it is set to winter
(summer) season.
Winter - S
(Summer - S)
Modification for southern hemisphere.
#Summer Time Mode
6 back to List of setpoints

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65