ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
454
Group: Engine
Value group Engine Related FW 1.9.0
Units %
Comm object 14522 Related applications AMF, MRS
Description
The level of diesel exhaust fluid tank.
DEF Level
6 back to List of values
Value group Engine Related FW 1.9.0
Units %
Comm object 12483 Related applications AMF, MRS
Description
The rate of ash in DPF (Diesel particulate filter).
DPFAshLoad
6 back to List of values
Value group Engine Related FW 1.9.0
Units %
Comm object 12484 Related applications AMF, MRS
Description
The rate of soot in DPF (Diesel particulate filter).
DPFSootLoad
6 back to List of values
Value group Engine Related FW 1.9.0
Units Depends on ECU value
Comm object 10153 Related applications AMF, MRS
Description
This is one of the inputs, which are defined by ECU. Order of values depends on type of ECU.
Note: Usually there are engine speed[RPM], fuel rate[L/h], coolant temperature[°C], intake temperature
[°C], oil pressure[bar], boost pressure[bar], load[%], oil temperature[°C] etc.
ECU-BIN 1
6 back to List of values

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65