ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
549
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1263
Description
This output is active when at least one generator voltage BOC or Sd alarm is present in alarmlist or isn’t
confirm.
AL Gen Voltage
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1254
Description
This output is active when the Alarm Maintenance 1 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 1 isn’t confirm.
AL Maintenance 1
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1255
Description
This output is active when the Alarm Maintenance 2 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 2 isn’t confirm.
AL Maintenance 2
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1256
Description
This output is active when the Alarm Maintenance 3 is present in the alarmlist. It means that counter of
maintenance is on zero or the Alarm Maintenance 3 isn’t confirm.
AL Maintenance 3
6 back to Logical binary outputs alphabetically
Related FW 1.9.0 Related applications AMF, MRS
Comm object 1419
Description
The output is closed when there is the shutdown alarm from the OIL PRESSURE (PAGE 634) in the alarmlist or
isn’t confirmed.
AL Oil Press Sd
6 back to Logical binary outputs alphabetically

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65