ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
77
Note: Use Up and
Down button to
select required level
of password.
Note: Use Enter button to enter selected setpoint.
Note: Use Up and
Down button to set
required value of
password.
Note: Use Left and Right button to move between digits.
Note: After setting new password use Enter button to confirm adjusted password.
Note: Use Up and
Down button to set
required value of
password again.
Note: Use Left and Right button to move between digits.
Note: After setting new password again use Enter button to confirm adjusted password or Page button to
discard changes and to cancel changing password.

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65