ComAp InteliLite AMF25 User Manual

InteliLite Global Guide
78
Note: Before changing the password controller has to be unlocked. In case that controller is locked, the
controller shows Password required screen. In that case the password has to be entered before changing the
password.
Log out from controller
Note: From all measurement pages we can fluently go to the setpoint group page by pressing Page button.
Note: Use Up and
Down button to
select setpoint
group Password.
Note: Use Enter button to enter setpoint group Password.
Note: Use Up and
Down button to
select Enter
Password.
Note: Use Enter button to enter selected setpoint.

ComAp InteliLite AMF25 Specifications

General

Inputs	8 binary inputs
Outputs	8 binary outputs
Power Supply	8-36 V DC
Communication	RS232, RS485
Operating Temperature	-20°C to +70°C
Supported Generators	Diesel, gas
Controller Type	Automatic Mains Failure Controller
Protection	IP65