InteliLite Global Guide
93
Note: Use Up and
down button to
select required
language.
Note: Use Enter button to confirm selected language.
5.3.7 Display contrast adjustment
+
Note: On any measurement screen press Enter and
Down button together for lower contrast.
+
Note: On any measurement screen press Enter and
Up button together for higher contrast.
Note: After setting a contrast, no another action is needed.
6 back to Controller setup
5.4 Remote Display
This chapter describes Remote display firmware IL3-RD, which is designed as a remote signaling and control
software for InteliLite family controllers. It is the optional software which is possible to upload into controller
instead of standard controller’s firmware.
To Next Page
Loading...
