ComAp IS-NTC-BB

IGS-NT Installation Guide
15
IGS-NT-SUS-PCM
Obsolute. Dongle for GeCon in Single Parallel to Mains application.
Not needed from version GeCon-3.0 (Marine and Landbased)
See chapter Dongle installation to learn how to place the dongle into the controller.
3.2.4. Available PC software
Name
Function
GenConfig
Common IGS-NT and IM-NT family configuration (off-line) tool.
InteliMonitor
Common IGS-NT and IM-NT family monitoring (on-line) tool.
WinScope
Graphic monitoring-recording tool.
IGS-Log
Common IGS-NT family logging PC SW.
IBConfig
Internet Bridge configuration tool.
Gm_setup
GSM modem setup tool.
ICBEdit
I-CB configuration tool.