Mounting procedure: dimensions, space and handling
29
HS-RC-C5E-TIN_02.fm
00/0411
Note:
*¹ Minimum space to guarantee proper ventilation. The spaces mentioned in the table
do no allow to reach the rear wall for maintenance purposes, for which an ergonimic
analysis is requested to guarantee the access.
Moreover:
– Make sure not to hinder the warm air circulation and ensure the area above the
Control Unit is free.
– If necessary, it is possible to install wheels with the option C5G-WHK: wheel kit.
The Wheel Option do not modify the cabinet total height but cannot be installed
in case the version is supplied with Application Box.
3.7 Lifting and handling procedures
The suitable procedure depend on the supply modality:
– Lifting the C5G packaged in closed crate
– Lifting the C5G on pallet without crate (Europallet 1200 x 800 mm)
– Lifting the C5G without package.
To Next Page
Loading...
Need help?
General