Comdial G0408 - Timed Hold Recall

3.5.5 Timed Hold Recall
Description: After a call has been on hold for a programmed length of time, the system will recall the
station that placed the call on hold. Set the hold recall time with this programming
procedure.
To Program: 1. Dial 14. “HOLD RECALL XXX”
2. Select time
—Dial 1 or Press A1 “HOLD RECALL 30”
—Dial 2 or Press A2 “HOLD RECALL 60”
—Dial 3 or Press A3 “HOLD RECALL 90”
—Dial 4 or Press A4 “HOLD RECALL 120”
—Dial 5 or Press A5 “HOLD RECALL 180”
—Dial 6 or Press A8 “HOLD RECALL 240”
—Dial 7 or Press A9 “HOLD RECALL 300”
—Dial 8 or Press A10 “HOLD RECALL 360”
—Dial 9 or Press A11 “HOLD RECALL 420”
—Dial 0 or Press A12. “HOLD RECALL 0”
3. Dial ✳ for configuration mode.
To change setting, repeat procedure and make different selection.
IMI66–107 Digital Telephone System
System Programming 3 – 35