Comdial G0408 - Voice Announce Block Button; Zone Page;All-Call Button

3.8.14 Voice Announce Block Button
Description: Telephone users can block voice announced intercom calls and station paging by pressing
this button.
To Program: 1. Dial 56. “BUTTON MAPPING ”
2. Dial 14. “ASSIGN V. A. B.”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57 = Dial 10–57 or press C10–C57.
5. Dial ✳ for next VOICE ANNOUNCE BLOCK button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment , dial 5604, press button, dial # select station, and dial ✳✳✳.
3.8.15 Zone Page/All-Call Button
Description: This button will provide a station with one-button access to all-call and zone paging.
To Program: 1. Dial 56. “BUTTON MAPPING ”
2. Dial 09. “ASSIGN ZONE”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Dial 1–3 for zone 1–3 “ASSIGN ZONE X”
—OR—
dial 4 for all-call. “ASSIGN ALL CALL ”
5. Select station ports (LED On = Selected)
Station 10–57 = Dial 10–57 or press C10–C57.
6. Dial ✳ for further paging button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment, dial 5604, press button, dial #, select station, and dial ✳✳✳.
Digital Telephone System IMI66–107
3 – 88 System Programming