3.14.4 Voice Mail Transfer on Busy
Description: Normally, the auto-attendant routes calls from a busy station to that station’s voice mail
box. Alternately, you can arrange for the system to alert the busy station when the voice
mail system is attempting to transfer a call. You may need to program the attendant
station to have this option.
To Program: 1. Dial 53. “STATION FEATURES”.
2. Dial 31. “VMAIL XFR ON BSY”.
3. Select station ports to be programmed (LED On = Selected).
—Station ports 10–57: Dial 10– 57 or press C10–C57
4. Dial ✳ for next feature
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
3.14.5 Transferring Callers To Voice Mail
Description: You can program a “Transfer To Voice Mail” button to automate the process of
transferring a caller to a mail box. Use this button in conjuction with a DSS or a mail box
extension number followed by a “2.”
To Program: 1. Press INTERCOM ✳✳ 1.
2. Press the button to which you wish to assign this feature.
3. Press 6 followed by the first voice mail port station number.
4. Press SPEAKER to exit.
IMI66–107 Digital Telephone System
System Programming 3 – 111
To Next Page
Loading...