Comdial G0408 - Automatic Call-Back Button; Blank Buttons

3.8.2 Automatic Call-Back Button
Description: When a user presses this button after they encounter a busy tone, the system will
automatically ring both the called station and the user’s station when the called station
becomes idle.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 10. “ASSIGN CALL BACK”
3. Select button to be programmed
—Press A1–A14, B1–B10.
4. Select station ports (LED On = Selected)
—Station 10–57: Dial 10–57 or press C10–C57.
5. Dial ✳ for next AUTO CALL-BACK button assignment
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
To clear assignment , dial 5604, press button, dial # select station, and dial ✳✳✳.
3.8.3 Blank Buttons
Description: Blank those buttons that you want to be dynamic line buttons or autodial buttons.
NOTE: When blanking buttons, be sure a previously assigned button is idle (feature
not selected by user) before you blank it.
To Program: 1. Dial 56. “BUTTON MAPPING”
2. Dial 04. “BLANK/AUTODIAL”
3. Select all buttons to be programmed
—Press A1–A14, B1–B10.
4. Dial #.
5. Select station ports (LED On = Selected).
—Station 10–57 = Dial 10–57 or press C10-C57.
6. Dial ✳ for further button blanking
—OR—
dial ✳✳for next button mapping feature
—OR—
dial ✳✳✳for configuration mode.
Digital Telephone System IMI66–107
3 – 82 System Programming