Comdial G0408 - Data Security Port; Dual Console Feature

3.7.9 Data Security Port
Description: While port is active on a call, this feature prevents any incoming tones associated with
other system features from interrupting the call.
To Program: 1. Dial 53. “STATION FEATURES”
2. Dial 26. “DATA SECURE PORT”
3. Select station port (LED On = Feature Assigned)
—Station 10–57: Dial 10–57 or press C10–C57.
4. Dial ✳ for next station feature
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
3.7.10 Dual Console Feature
Description: The dual console feature allow users to have two DSS/BLF consoles to complement one
telephone.
To program: 1. Dial 53 for station features. “STATION FEATURES”
2. Dial 34 to enable second console. “SECOND CONSOLE ”
3. Select console port
—Station 10–57: Dial 10–57 or press C10–C57.
4. Select station port that console is to complement
—Station 10–57: Dial 10–57 or press C10–C57.
5. Dial ✳ for next station feature
—OR—
dial ✳✳for configuration mode.
To clear second-console assignment, perform the following steps:
(a) Repeat steps 1 through 3 above
(b) Type console port number twice
(c) Dial ✳ ✳ for configuration mode.
IMI66–107 Digital Telephone System
System Programming 3 – 57