3.16.8 Dialing Time And Answer Time
Dial Time Limit
Description: The system does not include dialing time when it records the time of a call for costing.
You can program the amount of time that the system ignores for dialing purposes.
To Program: 1. Dial 75. “SMDA PROGRAMMING”
2. Dial 02 to program dial time limit. “DIAL TIME XXX”
3. Dial time in tenths of a minute
(001–999 or dial 000 to clear). “XXXX”
4. Dial ✳ for next SMDA feature
—OR—
dial ✳✳for configuration mode.
To change setting, repeat procedure and make different selection.
Answer Time Limit
Description: You can program the system to wait for a period of time before beginning to record costs
for a call. This answer time allows a call to ring and be answered by the called party
before the system costs it.
To Program: 1. Dial 75. “SMDA PROGRAMMING”
2. Dial 03 to program answer time limit. “ANSWER TIME XXX ”
3. Dial time in tenths of a minute
(001–999 or dial 000 to clear). “XXX ”
4. Dial ✳ for next SMDA feature
—OR—
dial ✳✳for configuration mode.
To change setting, repeat procedure and make different selection.
Digital Telephone System IMI66–107
3 – 130 System Programming
To Next Page
Loading...