Comdial G0408 - Assign Toll Restriction Tables to Lines; Assign Toll Restriction Tables to Stations

3.19.3 Assign Toll Restriction Tables To Lines
Description: Once you have created the toll restriction tables, assign them to lines.
To Program: 1. Dial 72. “ASSIGN TOLL-LINE”
2. Dial 01–16 or press A1–A14, B1, B2 for toll table 1–16.
3. Dial # to finish entry and display lines.
4. Select line ports (LED On = Lines selected to receive tables)
—Line port 1–16 = Dial 01–14 or Press A1–A14
—Line port 15, 16 = Dial 15, 16 or Press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then dial A1–A8.
5. Dial ✳ and repeat steps 2–4 for next toll table to line assignment
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
3.19.4 Assign Toll Restriction Tables To Stations
Description: Once you have created the toll restriction tables, assign them to stations.
To Program: 1. Dial 73. “ASSIGN TOLL-STA.”
2. Dial 01–16 or press A1–A14, B1, B2 for tables 1–16 (LED On = Selected table).
3.
Dial
# to finish entry.
4. Select station ports (LED On = station ports to receive tables)
—Station 10–57 = Dial 10–57 or press C10–C57.
5. Dial ✳ for next toll table to station assignment.
—OR—
dial ✳✳for configuration mode.
To clear current setting, repeat procedure.
Digital Telephone System IMI66–107
3 – 150 System Programming